Synthesis and magnetic properties of CoAlFe2O4 nanoparticles

Nanosized particles of CoAl_xFe_2-xO₄, where 0?≤?x?≤?2, were synthesized by the sol–gel combustion method and the magnetic properties of these compounds were investigated. According to X-ray diffractograms, the samples are single phase and the crystallite size is between 7 and 25?nm. The room temperature saturation magnetization of the samples was estimated from the cation distribution and ferromagnetic resonance spectra were used to determine the magnetocrystalline anisotropy. The results show that the saturation magnetization and the magnetocrystalline anisotropy vary over a wide range, from maxima of M_s =?0.42?MA/m and K?=?0.39?kJ/m³ for x?=?1.0 to minima of almost zero for x?≈?1.4, a result that could be useful for practical applications of these materials.     

多层圆片级堆叠THz硅微波导结构的制作

基于微电子机械系统(MEMS)工艺,提出一种多层圆片堆叠的THz硅微波导结构及其制作方法。为了验证该结构在制作THz无源器件中的优势,基于6层圆片堆叠的硅微波导结构,设计了一种中心频率365 GHz、带宽80 GHz的功率分配/合成结构,并对其进行了仿真。研究了制作该结构的工艺流程,攻克了工艺过程中的关键技术,包括硅深槽刻蚀技术和多层热压键合技术,并给出了工艺结果。最终实现了多层圆片堆叠功率分配/合成结构的工艺制作和测试。测试结果表明,尽管样品的插入损耗较仿真值增加3 dB左右,考虑到加工误差和夹具损耗等情况,样品主要技术指标与设计值较为一致。     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.     

Utilization and impacts of hydrogen in the ironmaking processes: A review from lab-scale basics to industrial practices

Hydrogen (H₂) energy is a promising candidate to replace carbon monoxide (CO) as a reductant for iron oxide reduction in revolutionary ironmaking industrial processes, and numerous studies have been conducted to intensively study the utilization and impact of H₂ in ironmaking processes. Therefore, this review first collects and compares the H₂-assisted reduction mechanism and kinetics. The impacts of H₂ on the reduction accompanying behaviors, such as the disintegration, swelling, sticking, softening, and melting of iron ores, are then summarized. Third, the performance of H₂ predicted by either mass and heat balance models or numerical simulation models in various ironmaking processes is highlighted. Finally, the different applications of hydrogen-rich materials in blast furnace and non-blast furnace ironmaking processes are further compared to illuminate H₂ utilization before our outlook on the use of H₂ in the ironmaking industry.     

单晶硅表层机械力学特性的各向异性分析

为探究挠性筋结构单晶硅材料的各向异性特性以及KOH腐蚀工艺对其力学性能的影响规律,进行纳米压痕实验,并结合原子力显微镜观察单晶硅表层3个主晶面上压痕裂纹形貌随晶向的变化规律,分析单晶硅材料表层弹性模量、硬度、断裂韧性等机械力学特性参数在(001)、(110)及(111)3个主要晶面上沿各个晶向的变化规律;分析挠性筋结构单晶硅材料(001)晶面的KOH腐蚀工艺对其材料表面机械特性的影响规律.结果表明:挠性筋单晶硅在(001)晶面上弹性模量的各向异性变化幅度明显,硬度及断裂韧性各向异性的变化幅度不大;挠性筋单晶硅在(110)晶面弹性模量和断裂韧性的各向异性变化幅度明显,硬度各向异性变化幅度不大;挠性筋单晶硅在(111)晶面硬度值、弹性模量及断裂韧性参数的变化幅度幅值均较小;确定了单晶硅表层3个晶面裂纹最易扩展的晶向方向,KOH腐蚀工艺使得单晶硅表面质量降低,腐蚀后暴露的表面微裂纹、缺陷等会使得单晶硅(001)晶面表层硬度、断裂韧性降低,从而降低了挠性筋结构的实际断裂强度.     

Looking out to look in: inspiration from social sciences for construction management research

In reaction to the recent call for critical debate in the field of construction management research, I argue that we should embrace the richness of adjacent fields of study in order to dynamically develop our own and face the plethora of contemporary societal challenges that exist in our industry. I introduce the concepts of other-than-rational thinking in decision-making and multiplicity in management responses as examples of inspirational sources from social sciences that would contribute to truly understanding the driving forces of construction management processes. I connect these concepts to contemporary studies in construction management and share my experiences with several positive collaborative approaches in conducting construction management research.     

Relation between etching profile and voltage–current shape of sintered SiC etching by atmospheric pressure plasma

Sintered silicon carbide (SiC) was etched by a dielectric barrier discharge source. A high voltage bipolar pulse was used with helium gas for the plasma generation. One stable filament plasma was generated and could be used for SiC etching. As the processing gas (NF₃) mixing rate increased, the width and depth of the etching profile became narrower and deeper. The differentiated V–Q Lissajous method was used for measuring the capacitances (C_eq) of the electrode after the plasma turned on. The width of the etching profile was proportional to C_eq. As the current peak value I_smx of the substrate current increased, the volume removal rate of SiC increased. The etch depth was proportional to the ratio of I_smx to C_eq. Additionally, because of the different characteristics of the plasma disks on SiC substrate by the voltage polarity, the etching profile was unstable. However, in high NF₃ mixing process, the etching profile became stable and deeper.     

Comparison of approaches to the numerical modelling of pure metals solidification using the control volume method

The thermal processes proceeding in the casting-mould system are analysed. Solidification process can be described in the different ways. One of them consists in the application of the Fourier–Kirchhoff equation in which the source function controlling the phase change is introduced. In this paper, two approaches to the modelling of pure metals solidification, i.e. the solidification proceeding at the constant temperature and in the artificially introduced interval of temperature are considered. Numerical model used at the stage of computations is constructed using the Control Volume Method in which the principle of conservation of energy (taking also into account the release of latent heat of solidification) is applied to each control volume ensuring the correctness of the model. The use of Voronoi/Thiessen tessellation to the discretization of the casting-mould system can accurately reproduce the shape of each sub-domain. In the final part of the paper, the examples of computations are shown.     

An enhanced state estimation for linear parabolic PDE systems with mobile sensors

This paper studies an enhanced state estimation problem of distributed parameter processes modeled by a linear parabolic partial differential equation using mobile sensors. The proposed estimation scheme contains a state estimator and the guidance of mobile sensors, where the spatial domain is decomposed into multiple subdomains according to the number of sensors and each sensor is capable of moving within the respective subdomain. The state estimator is desired to make the state estimation error system exponentially stable while providing an performance bound. The mobile sensor guidance is used to enhance the transient performance of the error system. By the Lyapunov direct technique, an integrated design of state estimator and mobile sensor guidance laws is developed in the form of bilinear matrix inequalities (BMIs) to meet the desired design objectives. Moreover, to make the performance bound as small as possible, a suboptimal enhanced state estimation problem is formulated as a BMI optimization one, which can be solved via an iterative linear matrix inequality algorithm. Finally, numerical simulations are given to show the effectiveness of the proposed method.